Hi all! I Have Lian Li A3 and want a smaller PC like Lian Li B4 (26.3L vs 21.3L.
My hardware:
Gigabyte Aorus X870M (mATX)
AMD Ryzen 9850X3D
Gigabyte RTX 4090 GAMING OC (340 mm length)
Arctic Liquid Freezer III Pro 360
Cooler Master V850 Gold SFX

Can this components fit in lian li B4? thanks!

I guess 24L should be okay with local rules. Moved from Macube 110 green.

• i5 11600K
• B560m Aorus Elite
• 4070 Asus Dual OC
• 32GB Goodram IRDM RGB DDR4
• Be quiet! Pure Rock 2 FX
• Darkflash C7, 5*120mm

A3 was out of stock at microcenter and saw this. I really like the form factor vertical. Was Sort of a pain jamming everything in there but it was worth it! I5 12400f, 32 GB DDR4, MSI 5070, 120mm aio, 5 120mm case fans. Might be unpopular but I think this is a better case than the A3. Update: cpu is at a cool 60°C and GPU sits at 71°C when gaming

I retired earlier this year so I decided to replace my current AM4 build by building a solid AM5 build. My last build was using the NZXT H1 and I found it too restrictive and too proprietary. I chose the Lian Li A3 case for my new build and included the following:

Lian Li - A3- mATX-WD Black Wood Front Panel

ASUS ROG Strix B850-I AMD AM5 ITX BIOS 1805

AMD Ryzen 9950X3D 16 Core-32 Thread

PNY GeForce RTX 5070 Ti Slim

64GB G.SKILL Flare X5 DDR5 6000 MT/s

CORSAIR SF1000 SFF Power Supply

upHere 360mm All-in-One Computer Case Fan

Thermalright FW PRO 360 Black AIO

4 TB Samsung 990 PRO NVMe M.2 SSD

And I'm running CachyOS

Granted, the A3 doesn't offer much in the way of cable management but I'm pretty happy with how it turned out.

Had been searching for a sleek little tower case to fit in the small corner of my desk and settled on the Jonsbo Z20 after some deliberating between that and the D32.

I don’t have a huge GPU nor a big AIO cooler so everything fit pretty snugly inside, and tried my best in shoving the cables behind the PSU. Think of adding a rear exhaust fan at some point too.

First PC build was about a decade ago with a GTX 950, and now I have an Arc b580! Not exactly high-end but with the current prices, I had to make do.

Cable management was a bit of a pain in the ass, but finally ended up with something I'm happy with. It's been so much fun going through my backlog with this baby (currently replaying Control in preparation for Resonant)

So ive had this for a while now more or less a week and a half and ive tamed the annoying fan noise via fan control but there is still a bit of humming during startup and shutdown .i was wondering if adding petg spacers or flat rubber grommets is better in the long run? Never had that audible of a sound on my inwin before and im curious to see if that would work.and if i do get petg spacers (im thinking around 15mm) is there a change or benefit for airflow aside from acting as funnel directly to the gpu

Hallo Leute

Ich bin aktuell auf der Suche nach einem neuen Mainboard für das EX5.
Wichtig ist das der GPU Slot soweit wie möglich oben ist damit ich ab Slot 1 einbauen kann.
AM5 und RAM Unterstützung bis 6000Mhz

Könnt Ihr mir helfen?

Good morning. I'm in trouble wanting to use the power xpg source core reactor ii in a ch160 plus. Locating it vertically I have no space to close it and laterally all I could do is pass it between the front and the fan. Unfortunately I didn’t know about the position of the connector and that it would be different from the rest. You think in another way? I see so many facilities and none of them have this invested like me.

Looking to build around a B850M Aorus Stealth MB, but the options for MATX cases seems really limited. Curious if anyone here has any and would like to share some pics

Built a PC using the Deepcool CH160 Plus. I was aware the GPU will make the SSD hot, but I didn't expect it to be this hot. It's about 70 degrees on idle 75 degrees while gaming.

I do have a 3080 ti that gets fairly hot so that may be the issue but I'm not sure.

My SSD is the adata legend 840 and I am using the heatsink that came with the MB

I had some extra pc parts, and while browsing online I found a sale on the ch160plus case from deepcool

Loving the form factor, cable management was harder than expected with a non modular atx psu

PC parts:
CPU: Ryzen 5 5600g , curve optimizer -10 all core, +200 boost clock
RAM: Adata 2666mhz cl16 ddr4 ram, overclocked to 3200mhz cl16
SSD: nvme stylos 512gb pcie 3.0
SSD: gigabyte 120gb sata
Motherboard (new) : MSI B550m pro vdh wifi
PSU: Corsair cv450 80+ bronze
GPU: Radeon RX6600
Fans: Thermalright white argb x3

I had a a320m-h motherboard without any wifi, so I ended up buying a new motherboard along with the case.

Now I have my own steam box with bazzite, using a dualsense and DualShock 4 controller

All ready for some mw4, looking forward to a new cod and grinding some camos, just about to jump into the campaign hoping its good 👌

I always wanted a vertical case and few of the vertical cases in market always have downside. The B4 ticked all the boxes that i want, versatility, compact and aesthetic.

The size of B4 is comparable to my previous case M2 (without the Aerodeck) but the build difficulty the B4 is harder due to fixed chassis unlike the M2. I have to plan the route of cable before installing psu which I hide most of the cables beside it.

Overall, i really like the B4 due to its versatility and compatibility with the current hardware.

Finally got my AIO so mostly done with the build for now (might be slight changes with an SSD heatsink or adding another SSD to the build etc. after all some upgrades are always part of the process). Got a really good deal on a Corsair AIO getting it 50% off opened box but new.

House: ADATA XPG Invader Mini (34L)

Gigabyte B550m Gaming X Wifi6 motherboard

AMD Ryzen 5 5600XT

XFX RX9060XT 16gb OC

32gb DDR4 Crucial Ballistix RAM (3200mhz cl16)

1tb Crucial P310 SSD+1,5tb HDD

Corsair Nautilus 240mm AIO+G-partners interstellar P-2 fans (two reverse bottom intake three regular exhaust back and top on the AIO radiator)

Gigabyte UD750gm PG5 V2 750watt PSU

I built this to use on my tv :)
Complete PC parts list
CPU: AMD Ryzen 7 9850X3D
GPU: ASUS PRIME RTX 5080 EVO OC 16GB
Motherboard: ASUS ROG STRIX B850-I GAMING WIFI
RAM: Corsair Vengeance RGB 32GB (2×16GB) DDR5-6000 CL30, AMD EXPO / Intel XMP, Gray
CPU Cooler: Noctua NL-LC1-24 240mm AIO
PSU: Corsair SF1000 (2024) 1000W Platinum
Storage: Samsung 990 1TB NVMe SSD
Storage: Samsung 990 2TB NVMe SSD
Case: Fractal Design Era 2
Case Fan: Noctua NF-A12x25 PWM 120mm

My First PC Build After 13 Years! 🖥️🔥

After having a gaming laptop due to my work location, I finally decided to build my own PC again, and I'm super satisfied with how it turned out!

The Jonsbo Z20 made the entire building experience surprisingly easy, especially considering how compact the case is.

Full Specs:

✅️CPU: AMD Ryzen 7 7800X3D

✅️MOBO: ASUS TUF Gaming B850M Plus II Wifi7

✅️RAM: CORSAIR VENGEANCE RGB DDR5 32GB (2x16GB) 6400MHz

✅️GPU: ASUS TUF Gaming Radeon™ RX 9070 XT

✅️CPU Cooler: Cooler Master Atmos II VRM 240mm

✅️Rear: Noctua NF-A12 G2 PWM (Intake)

✅️Radiator Fans: Noctua NF-A12 G2 PWM(Out)

✅️PSU: Deepcool Gamer Storm 850W Platinum SFX

✅️Case: Jonsbo Z20 - Glass Panel (Black)

✅️Storage 1: 980 Pro 1tb

✅️Storage 2: 1tb Pcie Gen 3

✅️Accessory: Cooler Master Extension PVS 16 AWG Extension sleeve (Used only for PCIE to achieve the Cable Management)

Benchmark Results:

✅️Cinebench 2026 Multi-Core: 4,276 points

✅️3DMark Steel Nomad: 7,367 points

✅️3DMark Graphics Test: 73.68 FPS

✅️CPU Temperature (Cinebench): ~76°C

✅️GPU Temperature (Steel Nomad): ~49–52°C

Final Thoughts

I originally planned to install two slim fans at the bottom of the case. However, after running multiple benchmarks and stress tests, I found that the temperatures were already excellent, so I decided to skip them.

I’m glad I waited until after building and testing the system before buying those extra fans!

Overall, I’m extremely happy with the performance, thermals, and simplicity of this build. The Jonsbo Z20 definitely exceeded my expectations!

​A few months ago, I posted my CH160 Plus build. The all-red Corsair fans were a childhood dream, but they ended up being way too blinding and loud for daily use. I just overhauled the thermals, acoustics, and aesthetics, starting by swapping the Deepcool air cooler for a Deepcool LD240 AIO. The digital pump display looks incredibly crisp! For stealth and silence, I ditched the red ML120s for all-black P12 Pros and added custom 3D-printed fan spacers. Pushing the fans off the chassis panels completely killed the turbulence and made the rig whisper-quiet. I also reused the leftover AIO RGB fans, jankmodding them to the bottom of the case to feed the GPU, giving it that sweet 90s JDM underglow vibe! The glass panel turned into an accidental stickerbomb. I originally just put a few stickers on it to hide some messy cables, but I just couldn't stop! I finished the whole look with a retro Pentium II cartridge resting right on top. Loving the new setup, let me know what you guys think of the transformation!