Hi all! I've been working on a site that makes it easy to look up what a Limited Edition really goes for on the secondary market: platetracker.net

A few things the data shows

• Across the 196 plates with a current price, the median resale is +35% over retail, and about 3 in 4 resell above what Displate charged.

• Recent drops are doing best. 2025 and 2026 editions sit at a median of +60–67%, while 2022 and 2023 editions are barely above retail (+6–8%).

• Star Wars is the biggest market by far, with $550K in resales across its 27 editions. Next come Jonna Hyttinen ($219K) and Cyberpunk 2077 ($157K).

• All told: $3.77M in recorded resales.

What's on it

• Every Limited Edition. All 431 so far (361 LEs, 51 ULEs, 15 Luminos and 4 event exclusives), each with its own page: the last sale, the median of the last 5, and a chart of every recorded sale back to February 2021.

• The price the buyer paid, not the asking price. About a third of fixed-price eBay sales go for less than the listing shows, because the seller accepted an offer. Where it can, the site uses eBay's own sales data (Terapeak). Recent sales link to the listing, a snapshot of the page and the sale record, so you can check any number yourself.

• A market page with resale volume by month, how each type and release year does against retail, and the best, worst and most traded plates.

• Franchise and artist pages for everyone with more than one edition (Star Wars, Marvel, Arcane, Jonna Hyttinen, Tobias Roetsch…). Each shows their whole lineup and how it's held up.

• Copies left at Displate for editions still on sale, checked every 6 hours. You can see how fast each one is selling, how many a day it'd need to sell out, and an "on pace to sell out" badge when the pace really supports it.

• Did it sell out? For older editions I went through archived copies of Displate's own stock counts. 222 editions sold out before their window closed, and 70 closed with copies left. Displate's site doesn't show this, because it labels every closed edition "sold out".

• Saved plates. Star the ones you own or are watching and filter the gallery to just those. They're stored in your browser, so there's no account needed.

• Updated every week, with a changes page showing what was added.

Where the data comes from

Almost all of the history (13,850 of the 13,927 sales) comes from the community spreadsheet that has logged Displate eBay sales since February 2021. Huge credit to its maintainer for years of careful work; the site links the sheet on every page. Newer sales are read from eBay directly.

It's free, with no ads and no account. It isn't affiliated with Displate or eBay, and the prices are past sales, not appraisals.

If something looks wrong (a sale on the wrong plate, a price that seems off, a missing edition), there's a feedback link on every page. I'd also love to hear what would make it more useful.

Hey Guys!

I am auctioning off part of my collection on ebay.

Link: https://www.ebay.com/sch/i.html?item=287658083515&rt=nc&_trksid=p4429486.m3561.l170197&_ssn=bash-it-shop

LE price starts at 30€ plus shipping

ULE price starts at 50€ plus shipping

Consolidated shipping is of course possible.

Based in Austria (EU)

Shipping Worldwide (insured possible to declared amount)

Packages will be sealed tamper proof

For previous experiences search for Insanity or vwvchris here or on Discord.

Detailed pictures of each Displate are available upon request but most are still in their original packaging.

We love the return to Night City, so to celebrate, we’re launching official Cyberpunk: Edgerunners Season 2 Displate Shards

Once again, this is a Limited Drop Run, so once the Shards are sold out, they'll be gone forever!

...and there's one more surprise, but access is denied for now 😉

Available for Displate Club Members via Early Access NOW, and to the public tomorrow, October 20th at 12 PM EST/6 PM CET

Find the drop here -> https://displate.com/l/chooms

________________

We've been seeing the love, hype, and feedback you've all been posting here about our newest product offering. Thank you & keep it coming! We're excited about the future! 🙂‍↕️

So, I'm almost 100% sure the magnet could hold up the poster, but the place i wanted it doesn't have a smooth wall at all and in this case i don't trust the glue as much, so i framed it and mounted it traditionally with a nail. I love how it turned out !

I’ve been checking Displate's website every now and then for literally years, hoping something would finally change, but nope—still no shipping option for Hungary.
What makes this so mind-boggling is that Displate is based in Poland. We are both EU member states right in Central Europe, operating under single-market rules with zero customs friction and straightforward land transport. Yet somehow, they manage to ship to almost every corner of the globe—including places thousands of miles across oceans—while completely skipping a neighboring EU country right down the road.
It's frustrating to watch them constantly expand product lines, collaborate with new IPs, and ship worldwide, while a whole chunk of Central Europe just gets ignored year after year.
Has anyone ever gotten an actual explanation from their support team or inside sources about why this is? Is it some weird local carrier/logistics roadblock, an administrative issue, or do they simply not care about this market?
Would love to finally buy a few plates, but at this point, it feels like they're actively avoiding us.

I live in Canada and need mounting plate replacements as some of mine have fallen off the wall after a few years. I can order a kit of 3 but the shipping is more than the kit. Is there anywhere else to order them or any other solutions people have used?

I love my Displates. I have six of them, and they look great, but I also live in an older house with severely warped plaster walls. I tried to place them in the flattest spots possible while still making them look good, but two of them have fallen off already. Thankfully, neither was damaged.

I'm looking for a more reliable way to mount them. I considered using Command Strips, but they would likely need to be pretty thick to compensate for how uneven the walls are.

I've already checked the FAQ, and the magnets themselves stick to the wall without any issues. The problem is the Displates attaching to the magnets. Because the walls are so warped, the posters never sit completely flush against them, leaving noticeable gaps in certain areas. The largest gap is nearly 3/8 of an inch, while the others are smaller but still noticeable.

The warping is pretty severe, too. The top and bottom can be relatively symmetrical, while the middle or other sections of the wall curve inward or outward in different directions.

Has anyone dealt with a similar situation or found a better mounting solution? I really want to make sure these stay securely mounted, because I don't want any more of them falling and potentially getting damaged.

Edit: Thinking of screwing a slat of wood and mounting Displates straight to the wood rather than the wall. Even so, the wood might not be flat considering the slopes and will give off a slanted look. Not sure, kind of a bummer because I want more Displates but I'm hesitant until I come up with a proper solution. I also thought about more magnets. Not sure give me your best input please!!!!

Hi

Shipping these 3 limited edition displate

Marvel Devourer of Worlds poster number 258/1500 for 149 euros

DC Harley Quinn Limited Edition Displate Poster Number 441/1000 for 199 euros

Assassin's Creed Limited Edition under the black flag 490/700 for 169 euros

Thanks

Shards fit nicely in perfect fit sleeves and toploaders, I didnt expect this to be the case but was nicely surprised

Hello, im new to displate and shards, and have been trying to sweep up formerly released cyberpunk shards. I saw the next drop is Oct 20, and hinted at being anime. Cyberpunk Edgerunners 2 drops on the same day on netflix. I hope its this, but curious what you all think it will be?

anyone else having issues with delivery , it’s been saying the same thing for the past 3 days.

Am I wrong for expecting two posters from the same collection to have the same colour?

The one on the right has a darker background compared to the left. It is more obvious in person compared to photo.

Is this normal?

can you guys send some my way? cant find any

First of all: yes these look and feel really good and have a decent weight to them.

But the price is imho too high. Even for such a low print count (we still dont know how many ultra rares got printed i think). And from what i have seen, the rares seem to be looking pretty similar and have a better holo finish to the ultra rares, that have a barely noticable golden shine to them.

Sizing: they are similary to other TCG and fit into the respective sleeves, which is another problem i see. The ultra rare shards are NOT big at all for a price you get a full LE and a half.

Conclusion: i hope everyone gets a chance to buy a ultra rare when the next drop comes and hopefully working better than this one. It was messy. But for me i will probably just buy common or rares in the future if i like the theme. Too bad displate, as a EU company, only sells regular shards in the US. I hope they change this asap because some of the other shards that are already out are really good looking.

The Centering on the shards are way off. If i wanted to send this in to get graded im getting a 9 due to poor Centering. The border Centering is just so obviously off.

Will Centering be addressed in later drops.

Hello everyone.

Today i got my Holo displate shards and wanted to share some pictures and comments on them.

Personaly i love them. They feel so nice and look so cool (i have the holo version). They are about as thin as a classic trading card and have a textured surface similar to textra. I hope they release many lines and maybe a way to buy them as singles.

(Yes i know the first two images are turned to the side. Sorry about that)

Hey guys, just wanted to post my collection after 1 1/2 years of constant searching :) Hope I get the preparation/Vision of Japan soon.

Really sad question as I’m in Canada and don’t want to spend $50 for 3 replacement leafs and magnets.
Is there a way to mount the posters without them or do you need the magnets?

Has anyone had luck finding the Shards at either Best Buy or Target in the Los Angeles area? Im really interested in the Witcher Series and would love to grab some.

Just noticed this lmao

6 different classes, 1 new product. Officially launching our Dungeons & Dragons Displate Shards, mini collectible metal posters ⚔️

These mini metal posters come in three different rarities: Common, Rare, and Ultra-Rare, and are shipped directly with a double sided magnet so you can hang them on any metal surface you might find!

They'll be available for Displate Club Members via Early Access at 12PM EST/6PM CET Today, October 5th, and to the public tomorrow, October 6th at 12PM EST/6PM CET.

Check them out here https://displate.com/l/reddit_shards