r/Holden • u/jacob_sterling • 3d ago

Personal Holden Tips for simple VE setup

Gallery image

Gallery image

has anybody tried any of these? if so how did it go, looking to put in VE ssv

3 Upvotes

81% Upvoted

8 comments sorted by

2

u/Smart_Interaction744 3d ago

That’s a Ute system, won’t fit a sedan/ wagon.

1

u/Practical-Basis-9541 18h ago

You can make a Ute system fit, the only difference is the rear muffler pipe is about 50mm longer on a Ute so need to cut and weld.

2

u/Aromatic-Letter-6298 2d ago

keep decent resonators in it. A loud VE is fun for five minutes, then the cabin drone gets old fast.

2

u/KnowledgeCapital7994 3d ago

Also you don't need 3 inch. 2.5 is fine in most cases and sounds better on long drives

1

u/CommyEnjoyer 2d ago

I got the Ultrex 3" with 1⅞ headers and 100 cell cats for my VFR. I think it was around $2500, it has no drone at 100 and lumps along at 60. Doesn't help with this system, but it's an opinion. 😉

1

u/jameshewitt95 gimme your 3.6s 2d ago

That OTR looks not so good, go with a Ramjet or a VCM

I've never heard anyone say good things about empire exhausts, and the Xforce one is a little more expensive and are half decent. I have an Xforce on my ute and it's been fine for a few years.

1

u/jacob_sterling 2d ago

would U say OTR is worth if getting a 91 tune with the exhaust and extractors?

1

u/jameshewitt95 gimme your 3.6s 2d ago

OTR is usually worth a solid 15kw, so yes I’d say it is