just picked up the 32r evo recently to replace my old r383 on my t818. after using it for a few days without the LEDs on beamng i found myself itching for more and was wondering if there are any work arounds to get the led to work (knowing TM this implementation is gonna take years) hoping somebody here has some advices.

At start up connected to my Xbox it won’t stop calibrating. On my laptop, where I updated the base to 1.60 and the SF1000 to 9.15, it doesn’t do this. It does the same with the wheel that comes with it. The video is what the wheel does, and after a couple of seconds it starts again.

Is this fan it takes a few minutes but it started after I was testing the forces on the control panel

Bonjour, Je cherche des Vis pour mon THRUSTMASTER TM Flying Clamp

Savez vous ou je pourrais trouver des pieces ? merci beaucouo

What do i do now? Doesnt go into the wheel, really wanted to play today, but the amazing enginners at thrustmaster made these cables just randomly break, i am not even kidding it just broke off, i took it out safely, pressed it down, click and broke .-. What now?

I installed all correctly, with also the sf1000 upgrade quick release but all i see on the dash is the one from 2021, the old version, whille when i was playing with t300 i used to have the new 26’ dash.
Also the screen stay freeezed sometimes..

Hi there all so I recently had to buy another SF1000 wheel as my other one broke i then got it delivered yesterday and I had did a firmware update on the wheel with not problems. But as the second base needed a new update I then try to update it and it completely shuts down. I followed all the procedures how to reboot the wheel base but its still not turning on can anyone help

GT7 Spec IV - Release notes: We revised the force feedback for the THRUSTMASTER® T598.

= for this great update, example of new FFB optimized settings

NB: About ENGINE ROAR - Select LOW or MID

https://ts.thrustmaster.com/download/pictures/PCMAC/T598/T598_FFBProfiles_GT7_Red_Spec_IV.png

Llevo unos meses con el t598 y me gustaría cambiar el aro por un vortex de rally sería posible con el adaptador Quick reléase mil gracias dd ante mano ❤️‍🔥

Hey,

I was playing fine 14th of october, with my Sol-R4 hotas. I alt f4 the game, turn off my computer and go to bed.

The following morning, I go to play again after Wardogs wiped and now neither the computer or the game register any input from the buttons on grip/stick. The X/Y Axis work just fine.

This means I cannot shoot, flare etc and is just really frustrating as the unit is not even 1month old.

I do not believe it to be a hardware issue, as it happened overnight and nothing moved an inch physically in the time being. Let alone it working just fine when i Alt-F4'ed.

I am not very tech savvy, but I have tried doing this:(Somewhat, I am not very tech savvy so idk if I did it correctly.)

1. Hardware calibration on both base and throttle. (Both base and throttle buttons seem to work/notice input during hardware calibration. but not on windows joy.cpl)
   
2. reinstalled drivers for the hotas, also deleted them. did this multiple times. (Hopefully correctly.)
   
3. Reverted windows update that happened the night of the grip breaking. (Hopefully did this correctly.)

Please if any1 can help, I will pay you 50usd

I you want a rally-style lever for your TH8S, I made this with a MTB grip: https://www.printables.com/model/1877247-easy-swap-twistlock-mtb-grip-shifter-knob-for-thru

Feedback and suggestions welcome!

I've been working on a modular, 3d printable shifter knob for the Thrustmaster TH8S.

The idea is to make a shifter knob that can be tuned to suit your preferences. I've designed two main variants in different sizes, with interchangeable tire styles for different grip options, optional weights, and even a version designed for TPU or other flexible materials.

I've printed and tested all the versions except the SoftGrip variant, since I don't currently have a setup for printing TPU/Flex. So that one is still untested.

I have a few more ideas for more customization.

I'd love to hear what you think! Are there any features you'd like to see added?

You can find the models here: https://www.printables.com/model/1871886-tireshifter-modular-shifter-knob-for-thrustmaster

P.S. These are all photos of actual 3d-printed models. I colored the wheels with acrylic markers, which have held up surprisingly well even without a clear coat, although I'd still recommend using one. Of course, anyone with a multicolor printer can print these details in a different filament color.

Hi everyone,
I'm playing Ace Combat 8: Wings of Theve on Steam with the brand new T.Flight Hotas Neo AC8 (PS5&PC version ), but the game keeps showing Xbox button prompts (A/B/X/Y, etc.) instead of Cross/Circle/Square/Triangle etc.
I looked for a setting in the in-game options to change the button icon style. [found nothing / found nothing clear]
I tried [enabling / disabling] Steam Input for the game in Properties → Controller.
I'm not using DS4Windows or any tool that makes my controller appear as an Xbox pad.
I uploaded the Thrusmaster’s last Drivers, and i’m on green led mode

Questions:

Is there a hidden option or launch parameter to force PlayStation prompts?

Does anyone know of a mod that swaps the Xbox icons for PlayStation ones? I couldn't find one on Nexus Mods or the Steam Workshop.

Has the dev mentioned a fix for controller support in an upcoming patch?

Thanks in advance!

My Thrustmaster T-LCM pedals have an intermittent hardware issue. Initially, they were completely dead: the LED would not turn on, and neither of my two PCs detected them via USB. After several attempts, they suddenly started working again, and all three pedals functioned normally in the Thrustmaster calibration software when connected to my T150 wheelbase via RJ12. However, after approximately 15 minutes, they stopped working again.

When connected directly to the PC via USB, the LED sometimes lights up briefly and then turns off. Eventually, it stops lighting up altogether, and Windows no longer detects the pedals. perienced this issue or found a solution?

I have been heavily anticipating for my used T300RS GT off ebay to arrive ever since my T150's gear system broke, but was disappointed when the power cable appeared to be missing and got even more disappointed when after a week of wait I received the power cable and tried plugging in my new wheel for the first time: No sign of life.

After 1h+ of troubleshooting, I finally got my wheel to be detected by my pc.

But then another problem arose: The calibration upon plugging in the wheel into a system wasn't working and everything that shouldn't be happening was happening ..

So I went back to troubleshooting.

I found a motor calibration software by thrustmaster themselves so I went ahead and did that. But at around 90% the process always fails. When I then closed the software, my wheel was no longer being detected under its name, but rather as "thrustmaster ffb wheel" (as seen on video).

After seeing that very thing, I completely gave up.

At this point it has been 2+ hours and I still didn't even get to test the wheel in game.

So here I am with my very last bits of hope before refunding the wheel and getting another,

hopefully working, t300rs, since a big part of me is thinking I just got a non-functional model.

Please let me know what I can do to get my wheel up and running or if it really is unfunctional and I should just refund it 🙏 Every single bit of advice means a lot cause I'm REALLY and I mean REALLY wanting to get this thing to work.

P.S.: If I do refund it, is it better if I just buy a T300RS again (since I already got the t3pa pedals)? Or do I save some money and get a better one instead? I mostly need it for drifting in BeamnNG, so I will need 3 pedals. Budget is around 300€ used (I already have a shifter)

Hey there my SF1000 wheel wont show me any data. The issue started 3 days ago so I updated T818 Base and the SF1000, but it wont work. I started the thrustmaster hardware test file and it worked perfectly fine, it seems like the base does not get any telemetry data...Any ideas?

Hey everyone!

I recently bought the Thrustmaster T.Flight HOTAS One Microsoft Flight Simulator Edition, but I find it way too light. Whenever I apply a bit of force to the joystick, the base lifts off or moves around.

I'm also not a big fan of the all-plastic build. It feels a bit cheap.

Do you have any suggestions for keeping it stable, or would you recommend a different model or brand with better build quality?

I mainly play MSFS 2024, but I'm also planning to use it for DCS, War Thunder, Star Citizen, etc.

Thanks in advance for your advice!