Is there anything I can do to fix them or is it just age?

The silicone hook on one of my Beats Fit Pros broke off and I’m wondering if there’s any way to fix it. I looked on Amazon but could only find complete replacements that require you to unscrew the back part of the device but I only need to replace the silicone cover. I can see where I can peel off the remaining silicone while leaving the rest of the device in tact. Didn’t see anything on Apples’s website either and no store in my area. Any ideas?

Bonjour, je cherche un endroit pour changer l’horrible câble du 770. Connaissez vous en un sur Paris de préférence SVP ?

Hi guys, can anybody recommend a way to make my headphones sit more snug on my head? I have long hair and the band on PX7 S3 doesn't have much grip it slides about quite a lot and they can easily fall off if I'm not careful, also wondering if I can somehow prove the clamp force on my head which is probably on the larger size (8¼-8½).

Hi, does anyone know where I can sell a pair of old Sony Mdr-5a headphones with the orange fome covers??

I've had this headset for over 10 years now and i'm keeping it alive part by part. I already had wrapped the headband in leather and he mic arm with shrink wrap.

But it was time for a bigger repair/mod because the cable had a break in it. So i thought "if im taking it apart anyways, i might as well re-design the entire cup while I'm at it."

and so I did.

I took inspiration from Capra audio's Knight and the modern Razer Kraken Pro (I think it's the V3 or V4 already?)

let me know what you think! I'm working on uploading the design to Printables as well. I eventually want to do a removable mic and do the right side cup as well

Im looking for brown earpads for the XM6's. I have the black version and would like brown earpads for the aesthetics. I value ANC alot, so an improvement on that would be wonderful. Lastly, i feel like a few mm's of extra depts would prevent my ear from touching the back. Any recommendations?

Thanki!

I have been using my Bose and Sennheiser earbuds for a couple of years now, and the left side randomly stopped working yesterday. Is there a repair shop in Karachi, Pakistan where i can get them fixed?

For context, I was using a card to get rid of the earwax cause the audio was getting less audible while listening to music. While i was digging earwax out, the mesh popped out (of my JBL Wave Beam). Luckily(?), I just gently shoved it back in and it seemed flush back into place. However, I’m still concerned if the mesh might fall back out. I tapped it and shaked it around and it seemed like it was fine but I just can’t shake that fact off. Just gunna assume its unsafe and not wear it before further feedback.

Hey everyone, I have a Takstar Pro 82 and I'm trying to replace the earpads.

The Pro 82 uses a clip-on mounting ring, but the replacement pads I bought don't have any holes, slots, or obvious mounting lip for the ring.

I'm not sure if I'm supposed to:

• somehow insert the original mounting ring inside the new pad
• cut/mod the new pad to fit the ring
• or if I simply bought incompatible earpads

Has anyone replaced the Pro 82 pads with ones like this before? What's the correct way to attach them?

Thanks!

In my sony headphones as far as I know the board and the speaker is completely fine but the frame was broken so today I got curious so I checked the headphone and found the chip inside the headphone a good one so thought to make something from it but i don't have any idea if you have any idea pls share to me

If any one needed the board or the speaker dm me

I also think to give it to someone who has real use from it

3

Hi everyone,

I have a Noise Airwave Max and the plastic hinge/joint connecting the earcup to the headband has broken. The headphones still work electrically, but the earcup is no longer properly held in place because the plastic hinge has cracked/broken.

I’ve attached photos of the broken area.

I want to know:

Can this hinge/plastic part be replaced separately?

Has anyone repaired this particular hinge before?

Is there a spare hinge/earcup assembly available for the Airwave Max?

If replacement isn't possible, what temporary/permanent repair would you recommend?

Would a local headphone repair shop be able to fabricate/reinforce this part?

I don't want to throw away otherwise working headphones just because of a broken plastic hinge.

Model: Noise Airwave Max

Problem: Broken plastic hinge at earcup/headband joint

Location: India

Я купил наушники ТА-56М с встроенным ларингофоном, но не могу разобраться как их подключить к компьютеру

**Title:**

If you've got a pair of headphones or a headset that's stopped working, don't throw it away just yet.

I repair all kinds of wired and wireless headphones/headsets in Islamabad & Rawalpindi, including:

* 🎧 Gaming headsets

* 🎙️ Call center headsets (Jabra, Plantronics, Logitech, A4Tech)

* 💻 Office and online meeting headsets

* 🔌 Jack replacement (3.5mm/USB)

* 🎤 Microphone issues

* 🔊 One side not working

* 🔋 Battery replacement (where possible)

* 🛠️ Cable damage, loose connections, and general repairs

I use quality replacement parts and will let you know beforehand if the repair is worth doing.

If you're in Islamabad or Rawalpindi and want to check whether your headset can be repaired, feel free to DM me with the issue you're facing

Happy to help and answer any questions.

I have these Sennheiser Momentum 3 Wireless headphones that normally turns on when unfolding.

Unfortunately this doesn't work anymore and I've identified the culprit as being the sensor in the hinge (see picture).

The headphones are designed where this is the only way to turn them on and off.

Does anybody have any idea if I could simply solder on my own power button, and make some janky homemade solution to this?

(sorry the lighting is really bad, I can take another picture if needed)

But yeah!! I don't know the anatomy of an earbud so the best way I can describe it is.. the front plate that the tip of the earbud is attached to has begun to like. Split? As you can see in the picture it's no longer strongly attached to the rest of the bud, and will not stick.

I just need to know if it's something I can fix easy with a specific type of glue, or do I need to just get a replacement pair. I really want to hold out until December so maybe I can ask for better buds as a Christmas gift.

if this isn't the right place to ask I'm sorry, and would love to know where the proper place to ask would be!! thank you for your time :D