My backyard is only this messy 80% of the time..
Did this with FPV Lap Timer on Android/iOS

Air65 Freestyle Edition motors are too fragile. This is the result of two months of indoor flying, with mostly very light crashes.

Update:

My flying style isn't slow, but it's not anything crazy either. It's mostly like racing, just a bit slower.

1303.5 5500 KV motors with 3 inch tri blade props
(5in pitch) nothing fancy but you can fly it anywhere. 5-7min flight time with 680mah Lava

Sure the lighting is a challenge but god it is so nice when there is wide and far just not a single person around. Just you and your Quad.

Parks here are also pretty well lit so as long as you stay arround the paths it's very doable.

The thing in the left of the video is my leg btw. Haha.

Hey all, looking for help with a Pocket that won't turn on.

What happened: I left it powered on in sim mode and walked away without realizing. When I came back it was dead, and it hasn't booted since. It was working fine before that.

Symptoms:

- Screen stays completely dark when I hold the power button. No boot sequence, no sound.

- With the arm switch in the armed position, the green arm LED lights up only while I'm holding the power button, but nothing else happens.

- With USB-C plugged in, the red charge LED comes on, but the radio doesn't boot.

- It has never booted on USB power alone.

- My PC doesn't seem to see it. I checked Device Manager (with hidden devices shown), uninstalled an old stale "STM32 BOOTLOADER" ghost entry, replugged the radio, and nothing new appeared.

What I've tried:

1. New batteries. I measured about 4V at the battery terminals inside the radio, so the batteries and terminals are fine.
2. Charging over USB-C. The red LED comes on, but it still won't boot.
3. Bootloader combo (both horizontal trims toward center while pressing power), with and without USB connected. No change.
4. Removed the SD card. No change.
5. A different USB-C cable + different port, not using a dock. No change.
6. Opened the case and disconnected the RTC battery for about 10 minutes to reset the board. No change.

The radio hasn't been dropped or exposed to water, and I haven't modified or flashed anything.

Since it won't boot on batteries or USB and doesn't enumerate over USB at all, I'm leaning toward a hardware fault: the power button or latch circuit, the main board, or the display. I'm planning to contact RadioMaster support under warranty, but wanted to ask here first:

- Has anyone seen this exact behavior (arm LED on while holding power, dark screen, nothing on USB)?

- Is there a way to force DFU mode on the Pocket that I could try?

- Is there anything else worth checking?

Thanks in advance!

Haven't flown for a month since something weird was happening with my drone and I thought my solderjoints were garbage (I did the best I could with 40year old iron dont ask why I kept that hand me down) so got a new one really lovely in fact for chinese brand and as soon as I took the top left motor off its left wire was disconnected so I soldered that took it to fly it was great I remembered why I love the hobby and then why I hate it as I crash, antenna pops off, I find it, head home and whent to put it back on this time with e6000 saw this and my first thought was "ah shit here we go again" now I've got iron in hand and will commence the repair

Hello everyone, I'm relatively new to FPV (4-5 months) and I've been mainly flying DJI O4 Pro and Vista. I am currently looking to move to analog because of "gear fear". Vista is kinda cheap but you can only look at obtaining them second-hand, O4 Pros on the other hand is kinda expensive to go full send and practice with. (Might not be expensive to you but im from a 3rd world country)

Does the HDZERO global shop do black friday sale? If so how much less were their goggles 2 last year?

I know it kinda defeats the purpose of going to analog for cheap and easy to buy parts but I was thinking goggles dont break because it is with you, not the drone and if i can get for cheaper during a sale, then why not lol

It's really not that far ahead of the skyzone O4x pro in terms of price so i thought why not get that and i might try racing soon.

EDIT: One more reason that im moving to analog is the latency.

Deep space now launched an upgrade kit to address the O4 gyro problem. Similar to Geprc they are trying to smooth out the camera movements with absorbers, available for the Seeker 3 and Roc4. As DJI is letting everyone else solve their problems, again, let’s hope it will work.

Radiomaster Zorro 4in1 mainboard. The 4in1 module has 4 cables But the Zooro mainboard still has 5 connectors, it seems like it can be directly installed with the internal ELRS module which has 5 cables.

I built a 4S analog drone using the beta fpv Pavo20 frame. The footage you're watching was recorded with a RunCam Thumb Pro 4K XV.

As you can see, I tried pushing it a bit faster than usual. However, right after that sharp direction change near the end, the drone seemed to lose control, snapped at an angle, and I wasn't able to recover it before crashing because I was too close to the ground.

Does it have something to do with the fact that I have ducted fans?

I'm using standard betaflight PIDs, I just changed the rates (I use soft rates).

I would like to never lose control of my drone because this time I was above a safe terrain, and I would be so sad if a crash like this will happen on a forest or over water.

Thank you in advance.

I'm kind of new to posting on reddit so i don't know how the mods approval is done..

Solved. I had an airplane model loaded on my radio. I created an empty model on the TX12, and everything started working as it should.

The radio is a TX12.

In the video, the final movement is an input on the roll stick. As you can see, for some reason it affects the throttle, and it doesn't even reach the full range from the center—even though I’m pushing the stick all the way over.

https://reddit.com/link/1x8yitx/video/m2c0bjcty6wh1/player

Bought a tx15 max, figured I whould upgrade elrs from 3.5.6 on my reciever to 4.1 and also on the transmitter. Flashed both also replaced lua on the transmitter, everything seems to work but they wont bind, same uid githash, also tried binding it traditionally and nothing. I whould appriciate someone s help troubleshooting.

Sim: The Zone, Preset: 2.5 Inch

Still running motors at a cap of 75% with about a .5 throttle. expo. I’m definitely getting better, but gotta get to work on my quick turns.. just still scared of plummeting to the ground. 😅

Massive ships, narrow waterways, and a different perspective from the sky!

A short cinematic FPV film featuring cruise and cargo ships navigating the locks along the St. Lawrence , captured with two very different drones - the DJI Avata 2 and iFlight Nazgul Evoque F6D V2.

Two drones, two different flying experiences, one cinematic adventure.