Especially compared to PLA poop

Hi everyone,

I’m noticing the first layer of my prints have these indents, does anyone know how to fix them? It’s like the design is not printing in these small gaps or the filament is not melting enough.

Have attached filament settings where I’ve increased nozzle temp. Filament is matte poly maker panchroma.

Printer is P1S :)

Thank you

I love A1

This model of mine has a lot of support, and sometimes the slicer doesn't generate support there, so I need to paint some on, but I never had that support that didn't exist and started printing in midair.

Looking for a solution, I tried painting more supports and closing and reopening the slicer, but it didn't work. It also isn't a visual bug because when printed, the support starts printing in midair.

Update: I changed the support type, and now it works.

Where do I even get started...?

I wanted to use my servo-shaped motors instead of throwing them out so I made the Cat Finder, a tiny FPV tank using just two motors, tracks printed in TPU and an ESP32-Cam.

I made the software for it open source, it can be controlled from your browser or phone, and if you have a Homeserver like I do you can control it from anywhere in the world, like when you're bored at work and want to see what your cats (or dogs) are up to. With the battery saving mode it has days of standby so you can wake it up and drive it anytime anywhere.

As you can hear in the video the CatFinder is a bit of a screamer due to the motors being quite cheap and noisy, but my cats don't seem to mind that much, if anything it makes them easier to find because they want to know what all the fuss is about

If you happen to have some "servos" which turned out to be motors give this print a try, it's cheap, quick to print and a great way to pass the time.

I don't know if links are permitted, if you want to build it, search for "Cat Finder" on Makerworld, I'd love to see your cats react!

I had a tumour removed from my skull (calvaria) in July. Beforehand, I turned my CT scan into a 3D model with InVesalius 3, smoothed it in Blender, fixed all non-manifold geometry, and printed it 1:1 on my Bambu Lab P1S. I brought it along as a visual aid for the surgical team, and afterwards my surgeon kept it as a medical demonstration model.

I also have a photo of my healing, stapled scar from after the surgery. I’m not sure whether this subreddit allows medical images like that though...

Hi everyone,

I’m looking for an original Bambu Lab H2S toolhead/nozzle cable in Hyderabad, Telangana.

I need the exact replacement part, preferably available for local pickup today.

If anyone has this spare cable, knows a Hyderabad seller, or can arrange one from another Indian city, please DM me with the price and photos of the part.
Thank you!

I’ve seen so many comments saying that the Bambu P1S Combo is basically a filament dryer. If it was then I just spent my money on a separate machine that dries filaments too. Is that true?

In our last post, we shared how to select and color parts using Geometric Coloring. Here is another feature we built into AIMIA's 3D Editor inMakerLab: Curve Split.

You just draw a closed curve on the model's surface, and our algorithm combines that loop with the model's geometry to fit a custom 3D cutting surface — plus you can add alignment pins directly for easy assembly.

AIMIA Beta is currently rolling out in waves on MakerLab — stay tuned!

I cannot find what the actual name of this piece is, it’s in the ams for the P1S where you push it down to disconnect the ptfe tube from the ams, does anyone know where I can buy one or print one, thank you!

All day today my prints have immediately been failing and I can’t figure out what’s going on. I’ve cleaned my nozzle, cleaned my bed, done a cold pull, recalibrated, tried different filament, etc. but no matter what I do, this keeps happening.

Any help would be greatly appreciated!

I ordered 4 spools of filament with free shipping a few weeks ago and it arrived in just two days, i even ordered it at like 4pm, but in january it took 1-2 weeks to arrive for still just a few spools, does anyone know why?

I’m very much looking forward to getting my first 3D printer, just waiting for the P2S Combo to be discounted for Black Friday. One thing I’m a little concerned about is I want to have prints be safe for putting things that may touch food, or toothbrushes, etc. in/on but also I want access to the wider variety of filaments that comes from not limiting myself to PLA Pure. How big an issue is it if I, for example, use a non-food-safe filament for a toothbrush holder?

Heyho People i just finished my 7th Toddler Mobility trainer by MakeGood in a Bluey theme!
Printed on a Bambu Lab X1C and enhanced with an Xtool Omni 1 UV printer
Special thanks to "Respect111" who 3d Modeled me the ears!
Really proud of this one
if you have any more questions, feel free to ask!
Links:
MakeGood: 3d-mobility.org
MakerWorld: https://makerworld.com/de/models/2066081-3d-toddler-mobility-trainer?from=search

I can’t figure out the issue with my P1S. It has about 1100 hours of use. I’ve tried declogging it and replaced the nozzle. I appreciate any help!

I hate the stupid sliding window adapter that came with my portable AC. So I designed a custom one to fit my window.

Then I thought other people might want a custom one to fit their window. Which is hard, because all windows are different. So I thought, hey, can I build a parameterized one?

Yes. Yes, I can!

Would love your comments and feedback, and maybe a boost or two. 😁

This is only my second model on Makerworld, so I need all the help I can get.

https://makerworld.com/models/3455178?appSharePlatform=copy

All - working with a P2S-AMS 2 Pro and I'd like to start experimenting with TPU filament. Made the mistake and bought Bambu TPU for AMS, print looks good on a flexible tennis ball, but there was no give or bounce to it.

Realizing I should have gone with 90A or 85A, any suggestions between the two? Assuming this will not go in AMS, how do you all feed it in? Thanks!

Could someone please help me understand why my first layer is printing some areas perfect and other over extruded?

I've trammed, calibrated, and many other variables with no luck....

Kit Card: https://makerworld.com/en/models/3454871

ChristmasCards Collection: https://makerworld.com/en/collections/38032094