Are there any offline stores in Kunming, Yunnan, China, that sell the ONEXPLAYER 3?

If I press the triggers in let's say a shooting game it won't register it's press unless it's 80% pressed. Is there a way to make it detect a press at say 30%?

Switching to hair triggers is not ideal because the game also has driving mechanics where I'd like to throttle the gas

Everything on this table is a product I’m happy to have in my setup, and am happy to answer any questions.

This handheld truly lives up to expectations, and exceeds them. Highly recommend!

I brought my OXP3 32gb and my legion pro 7i 5080 (also with OLED) on a one week holiday in Indonesia to see which one I'd gravitate towards. I spent about 5 hrs gaming in total across a few evenings in the hotel room; mostly playing ff7 rebirth, galactic racer, pga2k25 and msfs 2024.

I spent 90% of my gaming time on the OXP3. I'll break down the specs and experience:

OXP3 experience:

The form factor is so fun and immersive. It's comfortable to use it sitting or lying down. I also plugged it into the hotel tv and gamed on it using the wireless controller adapter, which is a good accessory but battery life disappointing. Main takeaways:

Good:

1) While handheld, the machine is quiet, cool and pushing 50 fps+ in everything.

2) on the crappy hotel tv, it's annoying that OXP3 is not locked 60 because without vrr it can be jittery, and look like 30fps or worse.

3) playing 1080p on tv from the bed (8 feet) was still mostly a fantastic experience and the graphics held up.

4) the more I use the controller the more I love it. Great sticks and buttons.

5) quite comfortable especially if you put a pillow in your lap to prop it up and take weight off hands.

6) kick stand is helpful to have even in your lap or on bed, kind of as a balancing leg that takes weight off.

7) battery life is excellent with Intel efficiency (performance; 60fps) mode with tdp otherwise at 30watts.

8) also easy to use on a plane.

9) position of ports, fan intake and exhaust is sublime for handheld use. Excellent engineering decisions there. Especially the single large fan as it's so quiet.

Bad:

1) machine is a buggy mess; it wouldn't restart or shut down until i updated the OXP3 drivers, Intel drivers and windows. Just crap and annoying and so un console like.

2) lack of a physical keyboard is a pain when it comes to Wi-Fi passwords, optiscaler pop ups, typing in airports in msfs 2024. Constantly using touch screen and then wiping the screen. On screen keyboard is too slow to use.

3) on screen keyboard doesn't work properly when in game on msfs 2024, and windows touch keyboard doesn't pop up.

4) couldn't plug in TV HDMI adapter, power, wireless earbuds and controller dongle at the same time. Had to sacrifice power and run on battery.

5) finger print sensor fails 70% of time. So crap.

6) pain in the butt to constantly have to exit steam big picture mode to sort out Windows issues.

Gaming laptop experience:

Good:

1) insane performance. Playing everything 90 fps+ with pristine dlss graphics, and in the case of FF7 Rebirth with dlss 5 at 55% scaling (via optiscaler) with FG = 100fps. That's next beyond gen.

2) seemless; everything works perfectly, mouse, keyboard, Nvidia, Intel, windows, screen. All in harmony with zero bugs and easy navigation.

3) it's so overkill for hotel tv that it just looks disappointing on anything but its own monitor, given the capabilities. But of a harsh negative, but it's too much capability for that setup.

4) despite this, easy locked 60fps on non vrr screen.

5) insane productivity monster for holiday video editing.

6) great for checking work emails etc.

Bad:

1) once plugged in, it's not moving anywhere; needs to be on a desk so it doesn't suck in bed sheets or pants instead of air.

2) you have to sit in a chair to use it.

3) it weighs a ton and it is totally impractical to use on a plane; just too big.

4) while battery is great for portable work, at about 6hrs, it throttles enormously while gaming on battery and lasts about 1.5hrs. so gaming on battery just isn't practical.

5) even though the legion pro 7i 2025 has a sensational balanced mode with great cooling, it's still WAY louder than OXP3.

Conclusion:

1) OXP3 is FAR from a console experience even with steam big picture mode, which is what I have from windows startup. If there's ever max support for steam OS I'm in! But I doubt it will ever be good enough (I have a mini ssd for example)

2) gaming laptop is a total performance beast and a breeze to navigate, but form fact is just not FUN.

3) despite all of this, next time I'll definitely take the OXP3 only, and borrow my wife's Macbook for work. Legion can stay on my desk at home, where it continues to be an incredible work and gaming machine, and great for portable work.

Bonus:

If I had to have only one; laptop, of course, because of portable productivity / work. Can't beat the versatility of a laptop.

Selling OneXPlayer 3 (24 GB RAM / 512 GB SSD model). It is in excellent condition with no issues. It will have a fresh Windows 11 install with all drivers and necessary apps.

Includes IGG perks: case (new), backpack (new), screen protector (new).

$1450 cash / zelle / venmo

Local pickup only in Orange County, California. Due to high cost of item, meetup location will be at the Irvine police station E-Commerce exchange zone. Please DM me if any questions or interest!

Can anyone explain how the "repeat key" actually works?

Using a Onexplayer 3

I configured my m2 button with the "repeat key" function.

If I press it, all of my buttons now are in turbo/repeat mode untill I re-apply the config. I have not found a way to toggle the feature off.

The description of the button tells me this should only be happening while the button is held.

Does anyone know how I can either toggle the feature on/off or make it only work while held?

Thank you.

Hello!

I wasn’t able to find any info on the new ONEXPLAYER 3. Does anyone known if it as pen support ?

Thank you in advance :))

Trying to get the ultimate SteamOS experience on OXP3

Using these 2 guides:

https://github.com/HHHHanasak1/onexplayer3-steamos-setup (installation and bugfixes)

https://github.com/HHHHanasak1/xess-xmx-linux (native XESS fix for Linux)

Wish me luck guys :D I have the device for 2 days and already tired of Windows BS. Gonna post the feedback after I'm done

I'm running POST WITH UPDATES in comment section

______________________

VERDICT:

Guys, unfortunately, it's too early. I think I spot a bunch of issues:

1. Perfromance degradation (needed correct SimpleDeckyTDP+settings)
2. Rarely, but system can freeze at some point (happened twice in 5 hours)
3. Random pixels changing colors. Not always, not all, but it's there. Random pixel can become red, green or blue for half a second. But it's hard to spot imo
4. HDR works, but as I understand, it's Gamma 2.2 and a bit worse than full HDR (HDR was updated)
5. UI is not as snappy as I experience on GPD Win 5 for example (fixed above)
6. Decky Loader has really slow download times, made it look like main store doesn't work
7. Some games easily show XeFG x4, some games don't
8. Optiscaler has weird behaviour in some games (The Witcher 3 NG can't enable XeFG)
9. Haptics are as bad as in Windows, but you can spot it more here + no control over strenght (I could test mod from Rog Ally via decky plugin, but I'm not sure it's worth it)
10. INSTALLATION IS NOT INTUITIVE RIGHT NOW. You need KB, you need external monitor (maybe, I didn't, but it's mentioned in instructions). At one point your display will freeze for 30 minutes while installing at that's NORMAL behaviour. It's not hard to do, but you need to be ready
11. 2 times sound went off and came back later (doesn't happen since)
12. You need to be experienced in Linux debugging/googling. Keyboard weirdness, UI size weirdness in desktop mode ect (it's not hard, but you need to go and solve it)

Now we all can be sure that Winhanced is the way to go for now. Unfortunately, SteamOS isn't a better experience right now, at least for me. Maybe in few months it will get better on SteamOS (especially with CachyOS if OXP3 gets official support). (not sure now, since performance is good I will stick around)

Good day everyone!

UPD 18/10/2026:

1. Found out that instruction author rolled out new update, which improves things quitew a bit
2. Found out that I needed to put CPU into performance mode in SimpleDeckyTDP, not only increase the TDP itself.
3. No more performance degradation from my side it seems. I will stay on SteamOS for a while!
4. UI is snappy as hell now

So as the titile says. Oxp 3(32GB) with it's G3 extreme is amazing. Blood of Dawnwalker, 20W, 1080p all Medium, XeSS, with Framegen via Optiscaler. Settings in game is DLSS balance with Framegen, but optiscaler routes this to Xess and FG with XeLL. I don't go lower than 70fps except for when after loading assets. I can game for around 3 hours in this setting (50% brightness. No wifi)

XeFG is set to 3x, but I don't feel a lot of latency. I can still do a lot of tight parries. Comparing this to my 9950X/5090 rig with no framegen, so that really speaks volumes of how Intel's Framegen and Low Latency tech performs.

First part of the video shows the OXP with what settings I use. Second part is the in-game capture. I'm using game bar, so FPS in the capture doesn't look that smooth, but in actual gameplay, it is. Should have recorded using my gaming rig via capture card.

Anyway. Good piece of hardware. My wife got angry with me last night, I stayed up awake until 6:30am... at least I'm besides her instead of the gaming room.

I've allocated the 'trigger gyro' function to the M1 key in program controller part of onexconsole but it doesn't seem to do anything. Anyone know how it's meant to function?

Onexplayer 3.

This thing is a beast. Very happy with my purchase. Had it sitting at the house for about 2 weeks and was worried that I received a dud. This unit is immaculate. Inserted my minissd but wasn’t reading it all day yesterday even after shutting it down , woke up and started up and it finally read the minissd. Played Crimson Desert & CyberPunk so far and I’m excited with how it’s running. This thing is bigger than I expected , pics online don’t do it justice. This is my first gaming pc handheld and I have no regrets with the purchase. Controls don’t wiggle at all either. If you’re on the fence about buying one. Shoot the bullet and get you one you won’t regret it !

Chose X2 Mini(Non Pro) over OXP 3 ...Difference was just 100$. I don't care about anything .. just want powerful device ,more FPS and stunning visuals. Is it a good decision? Please share your thoughts .. new to this sub!

Hi OXP subreddit. Received my Apex a few weeks ago and now have time to set it up.

It came with the big protective case, which feels safe, but also extremely bulky. Are there alternative cases that can fit the system with the TPU case or is there something similar to the ROG Ally X JSAUX case that has a TPU case with a hard plastic cover?

Also, for USBC, is it possible to game with usbc AND the battery? without the battery I can cold boot with 100w and increase up to 40W without an issue, but with the battery it is limited to 20w. I tried the bypass but that didn’t let me go past 20w.

Any advice appreciated. Thanks in advance!

edit, i found posts about using the Legion Go S Killswitch case as the card cover. Might go with that route

Forgive me if this has been posted, but would this be the solution to XeSS issues on Linux — namely Bazzite?

https://github.com/HHHHanasak1/xess-xmx-linux

Sorry if this was posted already! I just really need to get away from Windows 11 :)

Thanks!

I want to play the latest AAA games without spending a fortune. I got my OneXFly (8840u, 32gb 2tb) used for $450 right before RAM prices went through the roof.

It’s solid for all but the most demanding games. I have it running Bazzite and use it docked 90% of the time for AAA games from 5-10 years ago, but there are a few newer games I want to play that I know it will struggle with.

I’m hesitant to drop well over $1K on a whole new setup, or $800-1k on the OneXGPU 2, but I am tempted to get a OneXGPU 7600M for around $350-450 used.

I’m not expecting 4k 60fps on the latest AAA games, but will it get me solid 1080p performance at medium-high settings on a game like AC Black Flag Resynced? Is there anything else I should know before pulling the trigger?

I just received the onexplayer3 keyboard, but i've noticed that the trackpad does not "click" on it's entire surface.

I can tap on it of course, but if i try to actually click, only the lower part of the trackpad is clickable.

is that just the way the keyboard is, or is mine defective?

Found these listed on Etsy, as much as im waiting for a TPU Case, i guess this can offer some sort of protection also they look good.

Many colours but i cant justify the price.

It runs a lot better for me now. The settings aren't that great but it doesn't look bad and I while I still need upscaling, didn't have to reduce the resolution for playable fps like I did prior to 1.0

Hi all! Im testing & tweaking these games for SteamOS, wanted someone to help me test the same scenes on Windows. DM me if you're willing to help!

EDIT: THIS IS FOR ONEXPLAYER 3!!

Hey everyone, I was curious if anyone here does any kind of color tuning for the OXP3. For myself out of the box and after doing a graphics update the colors (on desktop at least) seem pretty dull. I normally up the saturation to really make the colors pop but I was curious if when gaming and stuff you guys leave things stock and let HDR do the work or if anyone changes the screen settings. Thanks!

Hey everyone,

Solo dev here. Like a lot of you, I got fed up bouncing between Steam, Epic, GOG, Xbox, Ubisoft and Battle.net on my Ally just to find something to play, and Armoury Crate's library never quite did it for me. So I built PocketDeck: a controller-first launcher that pulls every installed game into one 3D coverflow shelf you can browse entirely with the sticks.

I've decided to put most of my effort into the free version so it's a full launcher on its own, not a stripped-down demo. Here's what just landed in it:

• Interface translations: French, Arabic (full right-to-left layout) and Spanish for menus, settings and the Hub

• Smarter importing: faster, more reliable detection across Steam, Epic, GOG, Ubisoft, EA App, Xbox and Battle.net

• Performance work: snappier navigation, especially with big libraries

• Notification Center: everything in one place instead of pop-ups

• Steam Wishlist & upcoming releases inside the launcher (needs your own free Steam Web API key, and the setup screen walks you through it)

2-min video of it running on an Ally: https://www.youtube.com/watch?v=e96YBpu9ovc

Get Free version from official Site: https://www.pocketdeckapp.com

I'd genuinely love to hear what's missing, what's annoying, or what breaks on your setup. I read every comment and ship updates every few weeks. If you'd rather chat or send bug reports, there's a Discord too: https://discord.gg/pwUmECSPTp

Hello everyone, I need some help. I have a onexplayer F1 Pro hx370 with 64GB of ram and 2TB of storage.

This is the back story,

So, i bounce band and forth using windows and steamOS. I dont want to dual boot since I mainly tinker on this device. My d pad (only right and down) and my left trigger stopped working all of a sudden. I was on Steamos when it happened. The device hasnt been drop lately and i can confirmed its not software. I have installed windows again and ran some diagnosis and the inputs just do not read. I dont know if anyone else had this issue and fixed in software, or if this my be a hardware isue that i wont be able to fix. I really want to fix it since its the Evangelian Edition, but if I cant fix it im at hoping to sell it to someone who would take care of it and knows how to fix it themselves. Please let me know if anyone has a familiar story and if you have any help on how to fix it.

I just got my OXP3 yesterday, installed some games but have not had a chance to play it. And I then dropped it today (didn't zip the case before lifting it up) and the right controller broke, and the left controller cracked. They are still functioning fine so I guess I will try to glue them back as I don't want to spend $59+$19 shipping to get a new pair......

An awesome user named u/renalan posted the STL files for this kickstand extension.

I don't have a 3d printer but I uploaded the files to a site called print a thing and for ~$20 and 4-5 days later had the part, it fits perfectly and makes the kickstand so much better, no wobble at all when using it or typing.

Highly recommend!